FinishLynx Photo Finish System 9
Stop Bits: 1.0
Running Time: Normal
Auto Break: Off
Results: Off
Paging enabled; Size “1”; Time “8.0”
2.7 TR-3101 Setup
1. Identify which serial port
will control the display.
2. Connect the signal converter
kit (part # 0A-1125-0007) to
a serial port from
FinishLynx to the input jack
on the display.
3. Set up the scoreboard
options on the FinishLynx
computer as follows (refer
also to Figure 12):
Script: “DakTR-3101.lss”
Name: “Scoreboard”
Code Set: Single Byte
Serial Port: Select an
available COM port.
Note: If connecting to the serial port on the connection box, select Camera.
Baud: 19200
Data Bits: 8
Parity: None
Stop Bits: 1.0
Running Time: Normal
Auto Break: Off
Results: Auto
Paging enabled; Size “1”; Time “3.0”
Figure 12: Scoreboard Options for TR-3101
Comments to this Manuals