Daktronics Track & Field Interfaces User Manual download pdf (Page 14)

8 FinishLynx Photo Finish System

Edit Station

Set up the Edit Station options the

FinishLynx computer as follows

(refer also to Figure 10):

 Script: “Dak.lss”

 Name: “Results”

 Code Set: Single Byte

 Serial Port: Network (UDP)

 Port “22000”

 Running Time: Off

 Auto Break: Off

 Results: Auto

 Paging enabled; set the Size to

the number of lanes that can be

displayed on the matrix

display; Time “5.0”

2.6 Six or Seven-Digit Clock Setup

Reference Drawings:

TI-2020 or TI-2021 with FinishLynx ..................................................... Drawing A-267638

In this setup, the display typically sets on the infield near the finish. The display can be

controlled via a serial port on the capture computer or the on the Lynx connection box.

1. Identify which serial port will control

the display.

2. Connect the signal converter kit (part #

0A-1125-0007) to a serial port from

FinishLynx to the input jack on the

display. The cabling and configurations

should go according to Drawing A-

267638.

3. Set up the scoreboard options on the

FinishLynx computer as follows (refer

also to Figure 11):

 Script: “DakMDP.lss”

 Name: “Scoreboard”

 Code Set: Single Byte

 Serial Port: Select an available COM port.

Note: If connecting to the serial port on the connection box, select Camera.

 Baud: 9600

 Data Bits: 8

 Parity: None

Figure 10: Edit Station Options for Venus/V-Play Via UDP/IP

Figure 11: Scoreboard Options for 6 or 7-Digit Clock

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 51 52

Comments to this Manuals

No comments

Daktronics Track & Field Interfaces User Manual Page 14

Comments to this Manuals

Related products and manuals for Software Daktronics Track & Field Interfaces