Daktronics Track & Field Interfaces User Manual download pdf (Page 13)

FinishLynx Photo Finish System 7

2.5 DMP-7000 (Venus 7000) or V-Play Controller Setup Via

Network UDP/IP

Reference Drawings:

System Riser: Finish Lynx/Hytek/Venus Via Network .......................... Drawing B-267013

Riser; Hytek/Lynx/V7000, Fiber, SCBD ............................................... Drawing B-267220

In this setup, RTD (Real Time Data) is sent from the FinishLynx system to the DMP-7000

(Venus 7000) or V-Play controller over a network UDP/IP connection. Depending on the

equipment used in a particular setup, refer to Drawing B-267013 or B-267220 for cabling

configurations.

If an All Sport 5000 is used, enter code

8604.

Set up the scoreboard options on the

FinishLynx computer as follows:

Capture Station

Running Time (Figure 8)

 Script: “Dak.lss”

 Name: “Running Time”

 Code Set: Single Byte

 Serial Port: Network (UDP)

 Port “21000”

 Running Time: Normal

 Auto Break: Off

 Results: Off

Results (Figure 9)

 Script: “Dak.lss”

 Name: “Results”

 Code Set: Single Byte

 Serial Port: Network (UDP)

 Port “21100”

 Running Time: Off

 Auto Break: Off

 Results: Auto

 Paging enabled; set the Size to

the number of lanes that can be

displayed on the matrix display;

Time “5.0”

Figure 8: Running Time for Venus/V-Play Via UDP/IP

Figure 9: Results Options for Venus/V-Play Via UDP/IP

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

No comments

Daktronics Track & Field Interfaces User Manual Page 13