Daktronics DMP-1500/M3 (SS & ST) Setup With Show Control User Manual download pdf

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 1 of 11

201 Daktronics Drive PO Box 5128, Brookings, SD 57006

Tel: 1-800-325-8766 or 605-697-4300 Fax: 605-697-4746

Website: www.daktronics.com

DD1805670 Rev 11

2 July 2012

Minimum System Requirements

Any computer running the Show Control System (SCS-2000) must meet the

following minimum system requirements:

 Processor: Intel

Core™ i5 or better

 Chipset: HM57 or better

 Memory: 2 GB DDR3 SDRAM or better

 Storage: 7200 RPM HDD or better with at least 100 GB storage

(subject to user’s content storage requirements)

 Screen Resolution: 1024x768 or larger

 Operating System: Microsoft

Windows

7 Professional Edition or higher

(Home Basic, Home Premium, and Starter Editions not supported)

Venus 1500 Installation & Configuration

Note: Venus 1500 Version 4 is needed only when: a) no network connection

with a display is available during initial setup, or b) you are using a DMP-

1500/M3 scorer’s table. If a network connection is available and you are not

connecting to a scorer’s table, skip ahead to Show Control Installation.

Installing Via Internet

Note: If Internet access is not available on the Show Control computer,

save the file to a USB flash drive on a computer that does have access.

1. Open a web browser, and go to the following address:

http://dakfiles.daktronics.com/downloads/venus1500/v4/Install/Full/setup.exe.

2. In the File Download window that appears, click Save.

3. In the Save As window, browse to an easily accessible location, such as

“C:\Tools”. Click Save to start downloading.

4. After the download is complete, locate the “setup.exe” file and double-

click it to launch the Venus 1500 Installer. If this file was downloaded to a

different computer, be sure to transfer it to the Show Control computer

before opening it.

5. If any warnings appear, provide the requested confirmation to proceed.

6. Follow the onscreen instructions to complete the installation. It is

recommended to leave all default settings intact.

7. After installation is complete, restart your computer (if prompted).

Installing Via CD

1. Insert the Venus

1500 Version 4 installation CD into the CD-ROM

drive (typically “D:\”).

2. Installation should start automatically within a few seconds.

If it does not, press the Windows key [] and select Run from the

Start menu. Type "D:\CDStart.exe" and press [Enter].

3. Follow the onscreen instructions to complete the installation. It is

recommended to leave all default settings intact.

4. After installation is complete, restart your computer (if prompted).

Creating a Display

Before beginning, ensure that you have the following information

available about your display. If you are unsure about the following

information, contact Daktronics Customer Service for assistance.

 Galaxy Product Series: 3500, 3550, SS-20, SS-20i, ST-2014/16

 Height and Width of your display, in pixels

1. Double-click the Venus 1500 icon on the desktop.

2. You will be asked if you wish to register your software. Click No.

The purpose of this quick guide is to help a new operator install the necessary software to begin creating and displaying content on their message display.

Be sure to install software in the following order: 1) Venus

1500 V4 (if needed), 2) Show Control, and 3) Daktronics Communication Server (if needed).

1 2 3 4 5 6 ... 17 18

Summary of Contents

Page 1 - Minimum System Requirements

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 1 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 2 - 2 July 2012

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 10 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or

Page 3 - Installing Via CD

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 11 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or

Page 4

Page 5 - Creating Content

DAKTRONICS

Page 6 - Playing Content

DAKTRONICS

Page 7

Page 8

Page 9

Page 10 - provided by

Page 11 - For More Information

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 2 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 12

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 3 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 13 - DAKTRONICS

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 4 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 14

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 5 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 15

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 6 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 16

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 7 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 17

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 8 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Page 18

DMP-1500/M3 (SS & ST) Setup With Show Control Quick Guide 9 of 11 201 Daktronics Drive PO Box 5128, Brookings, SD 57006 Tel: 1-800-325-8766 or 6

Comments to this Manuals

No comments

Daktronics DMP-1500/M3 (SS & ST) Setup With Show Control User Manual

Browse online or download User Manual for Control panel Daktronics DMP-1500/M3 (SS & ST) Setup With Show Control. Daktronics DMP-1500/M3 (SS & ST) Setup With Show Control User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Control panel Daktronics DMP-1500/M3 (SS & ST) Setup With Show Control