Daktronics Rear-Ventilated GalaxyPro GP3 Series User Manual download pdf (Page 23)

18 Network and Communication Installation

Conguration Steps

1. Install USB-to-Ethernet adapter driver on computer.

2. Establish a link between the adapter and the display.

3. Turn display on.

4. Launch DisplayFind and discover the display.

5. Once the display is found, click the link to launch the conguration utility.

6. Click Logon to connect to the display (refer to the help le for additional information about

the conguration utility).

7. Congure the displays IP address to:

IP Address: 172.16.192.25

Subnet Mask: 255.255.0.0

8. Click UploadConguration.

9. Log out of the conguration utility.

10. Turn display off.

11. Congure IP address on USB-to-Ethernet adapter to:

IP Address: 172.16.192.20

Subnet Mask: 255.255.0.0

12. Turn display on.

13. Congure display in Venus 1500 software.

8.7 Standard Communication Options

Daktronics GalaxyPro

GP3 displays can receive various forms of Ethernet communication.

The standard communication options are listed below along with the communication-specic

document numbers. For additional information regarding communication installation, refer to

these documents, which are provided with the communication kits.

Communication Type Manual Document Number Quick Guide Document Number

Ethernet – Wire DD1417609 DD1417573

Ethernet – Fiber DD1417611 DD1417581

Ethernet Bridge Radio DD1685027 DD1417586

These are the standard communication types, but each site is unique and may include additional

equipment. For questions, contact Daktronics Technical Support.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

No comments

Daktronics Rear-Ventilated GalaxyPro GP3 Series User Manual Page 23