E SERIES OPERATIONS & MAINTENANCE MANUAL
Controls LayoutAll hoist operations are done through the operator station HMI. The operator station consists of a touchscreen monitor, Power On key sw
The Main Menu Screen The Main Menu screen (Figure 4) is the screen first seen after login and is used to navigate between the different operations, us
HOIST OPERATION SCREEN06 HOIST OPERATION SCREENSHoist Screen The Hoist screen (Figure 7) is the control center. The user will mainly operate the hoist
14Alarms Screen The E Series control system will record all drive trips experienced by any hoist connected to the system during the lifetime of the in
HOIST OPERATION SCREENHelp Screen The Help Screen (Figure 13) provides useful information on how to navigate the user interface of the HMI, as well as
16Hoist Setup & Debug The Hoist Setup & Debug screen allows the system administrator to set target heights for each individual hoist, label ea
TROUBLESHOTOTING17SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTIONController is not on Power failure Check incoming power to controller.Key switch not turned
WARRANTY08 WARRANTYThe Daktronics Standard Warranty (the “Warranty”) sets forth the warranty provided by Daktronics with respect to the Equipment. By
202. Exclusion from Warranty CoverageThe Warranty does not impose any duty or liability upon Daktronics for: A. Any damage occurring, at any time, d
WARRANTY214. Dispute ResolutionAny dispute between the parties will be resolved exclusively and finally by arbitration administered in accordance wit
Daktronics Automated Rigging System Manufacturer’s contact info 7200 Rawson Road Victor, New York 14564 tel 866-486-7835 585-924
Daktronics7200 Rawson Road Victor, New York 14564 USAtel 866-486-7835 585-924-5000 fax 585-924-0545www.daktronics.com/rigging email sales@daktroni
01 SAFETY INFORMATION 1 Warnings, Cautions, and Notes 1 Electrical Safety—General Warning 1 Included Safety Features 202 GENERAL INFORMAT
Warnings, Cautions, and Notes All Warning notes contained in this manual indicate information that may endanger personnel. WARNINGBefore working on a
Included Safety FeaturesOver-load and Under-load Protection - Load SensingThe E-Series Enhanced Control system allows the authorized operator to prese
WARNINGThe Vortek batten hoists are not designed to raise and lower people. These hoists should NEVER be used for this purpose.The Vortek® hoist syste
WARNINGIf it is necessary to operate a hoist from a location where the operator's view of the moving load is obstructed, a second person must be
European (50Hz) Based Models and Applications Single Purchase HOIST MODEL NUMBER LOAD kg SPEED m/secEV_-0301 360 0–0.10EV_-0509 500 0-0.90EV_-0607 630
Each Vortek® hoist is connected to the main high voltage power buss through a safety twist-locking plug. This plug brings in the main 3-phase power th
Comments to this Manuals